Products
PRODUCT APPROVAL
Murica 150 MS
| Metal | Max. Width | Substrate | Fastener | Clip Size | Clip Thickness | Clip Spacing | Uplift Pressure |
|---|---|---|---|---|---|---|---|
| 24 GA | 16" | 15/32" Plywood (Clip System W/ 90° Seam) | #10 | 2" | 24 GA | 12" o.c. | 218.8 PSF |
| COPPER 16OZ | 16" | 15/32" Plywood (Clip System W/ 90° Seam) | #10 | 3" | 24 GA | 12" o.c. | 198.5 PSF |
Product Approvals & Certifications
These documents are required for permitting and code compliance in Florida, HVHZ, and Miami-Dade jurisdictions. Please select the appropriate approval based on material and application.
Metal Productions - Fabrication & Installation Guarantee
Main Warranty
- 10-Year Coverage on Fabrication and Installation
Optional Extended Coverage:
- Every 5 years: maintenance inspection
- Can extend up to 30 years with proper maintenance
Important
- Coverage excludes natural disasters (storms, hurricanes).
- After-storm inspection service available.
Contact our team
Warranty Questions?
Frequently asked Questions
Metal roofing typically has a higher upfront cost than asphalt shingles, and cement tiles, but the long-term value is unmatched. With superior durability, minimal maintenance, and excellent energy performance, metal systems often deliver a lower total cost of ownership, especially in demanding climates like South Florida.
Metal roofs require very little maintenance. Routine inspections and occasional cleaning to remove debris are usually all that’s needed. Keeping gutters and drainage paths clear is especially important, helping ensure optimal performance and extending the lifespan of
the roofing system.
Yes. Metal roofing is one of the most sustainable options available. Many systems are made with recycled content and are fully recyclable at the end of their life. Their reflective properties reduce heat absorption, improving energy efficiency and lowering cooling demands. It’s an advantage for both the environment and long-term operating costs.
A properly installed metal roof can last 40–70 years or more, depending on material and environmental conditions. This exceptional lifespan is one of the key reasons metal roofing is trusted in high-wind and hurricane-prone regions.
Yes, the initial investment is typically higher. However, when you factor in longevity, durability, reduced maintenance, and better energy performance, metal roofing often becomes the more cost-effective solution over the full life of the building.
No. Metal roofs do not attract lightning. They are no more likely to be struck than roofs made from other materials. In the rare event of a strike, a metal roof can safely dissipate the electrical charge when properly grounded, just like other code-compliant systems.
Modern metal roofing is engineered to resist corrosion. Materials such as galvanized steel, Galvalume®, and aluminum include
advanced protective coatings designed to withstand harsh environments. Our systems use industry-leading finishes, including Sherwin-Williams Fluorpon, along with American-made metals for long-term performance and durability.
No. Metal roofs often help reduce heat gain. Metal roofs do not hold on to radiant heat like asphalt shingles or cement tile. Metal
instantly cools off when not in direct sunlight. Their reflective surfaces deflect solar radiation, and many coatings are engineered to enhance thermal performance. This can result in cooler interiors and lower energy costs during peak summer temperatures.